Reset for Linksys, Netgear, D-Link and Belkin Routers

There are a variety of reasons why a Router needs to be reset to the factory default setting. Forgotten or lost router password. Complicated Issues with wireless/wired network. Often, these issues can be resolved by a routerreset to the factory default setting.Ios Data Recovery Apple

Note: Before resetting the router, please make a note of the previous settings such as IP addresses, security keys, opened ports and services. You will need to reapply the same settings. It’s also advisable not to Restore the previous settings, best to start fresh.

How to Reset the Linksys Router to factory default.

1. Locate the small button that reads Reset from the back of Linksys Router. Press/Hold down the Reset buttonwith a Paper Clip for 30 seconds.

2. The lights need to start blinking, and then unplug the power cable. Wait for five seconds and hold the reset buttonwith the power turned off. Plug in the power cable and hold the reset button held for five seconds.

3. Expect the lights to flash again on the router. Settings on the router are now wiped out.Ios Data Recovery Best Solution

4. Click here https://192.168.1.1 to access router’s configuration page. You may be prompted for an administrator login. The older Linksys routers default username is ‘blank’ and the default password is “admin“. On newer Linksys routers, both the default username and the default password are set to “admin“.