How to perform a MemTest86+ Test

For those running MemTest86, please follow this guide here.

Please note that MemTest86+ has not been updated for over two years and is now thought to be outdated. Please see the guide above.

MemTest86+ is an easy-to-use DOS test that can help determine whether or not your memory (RAM) is failing. This test will work on both desktops and notebooks and will test all types of memory. The following article will guide you through how to test your memory for any damages or issues that may encounter.recover data from disk

There are two methods of running MemTest86+; a blank CD or a blank USB device, both of which will be explained below.

Downloading MemTest86+

Step 1: Make your way to this website: Memtest86+ – Advanced Memory Diagnostic Tool

Step 2: Once there, choose to download the bootable ISO .zip file.

Make sure to save the file to your desktop!

Step 3: Once the file is saved to your desktop extract the file by right-clicking on the folder and pressing Extract Now. Look below to find both the bootable CD and bootable USB methods.

Creating a Bootable CD

The following section will show you how to run MemTest86+ from a CD. For USB instructions look further down.

Step 1: First you’ll need to download a program called IMGBurn from here: The Official ImgBurn Website

Step 2: Run the installer when asked and follow the onscreen installation guide.recover data from formatted partition

Note: If asked to install any type of toolbar or any other software other than IMGBurn untick or decline the offer.

Step 3: Returning to your desktop, launch the IMGBurn software.

Step 4: In the menu of IMGBurn select Write Image file to Disk.